Followers

scrap creations top 3

Monday, October 25, 2010

Halloween ghost card

I made this card for the following challenges:

Sketchy Colors challenge #44 - Black, orange & green
Cupcake Inspirations challenge #82 - Inspiration challenge



Here is the card



Here is the sketch



The stamped image is from Hooked on Craft and I used H-0004 Ghosts from the Halloween range.
I used Copic markers to colour in the image. I used a Martha Stewart border punch for the fence, the orange layer, Pumpkins and the Witch. I cut out the flower and swirl from Marianne design Creatable dies.
I used pop dots to raise the ghost image as well as a bit of bling.

Please feel free to leave a comment as I would love to hear what you think.

 
 
Sunday, October 24, 2010

Sparkly seahorse

I made this card for the following challenges:
Tuesday morning sketches #64 - Sketch challenge
Colour create challenge #56 - Purple, Aqua & White
Southern girls challenge #4 - Glitter

Here is the card



Here is the Sketch


The stamped image is from Hooked on Craft and I used U-0003 Seahorse from the Under the sea range.
I used copic markers to colour the seahorse and added some stickles to him as well. I used a Martha Stewart border punch with Jac paper and applied white glitter on top. I just love the background paper that this is stuck to as I love Aqua and Purple and just had to enter this challenge and was waiting for the right time to dig this paper out from my stash.
I used pop dots to raise the seahorse as well as the purple layer.

Please feel free to leave a comment as I would love to hear what you think.



Saturday, October 23, 2010

Snowflake gingerbread man card

I made this card for the following challenges:
Delightful challenges - It's beginning to look a lot like christmas
Sarah Hurley challenge #14 - Xmas card but red and green must not be seen

This is the card

The stamped image is from Hooked on Craft and I used C-0010 Gingy from the christmas range.
The sentiment Happy Xmas inside his lolly pop is also from Hooked on Craft from W-0002 Christmas words
I used copic markers to colour him in and used diamond stickles as his icing.
I used my Cricut to cut out the round card from tags, bags, boxes and more at 12cm. George cartridge was used for the round circle layer which was also cut at 12cm. I also cut the blue gingerbread snowflake from When it's cold outside solutions cartridge and I cut this image at 10cm.
I used a Martha Stewart border punch with glitter paper cut at 3.2cm and punched each side. I used blue Metallic brads as well as bling for the center of the border. I used pop dots to raise the snowflake border as well as the Gingerbread image.

Please feel free to leave a comment as I would love to hear what you think.


Friday, October 22, 2010

Halloween cat

I made this card for the following challenges:

Kaboodle doodles challenge - Let's go Batty!

This is the card


This is the sketch


The stamped image is from Hooked on craft and I used H-0018 Halloween cats large from the Halloween collection.
I coloured in the image using copic markers and used stickles for extra sparkle.
I used a cuttlebug embossing folder for the spotty background and distressed it with sandpaper. I also cut out the bat and Boo from Happy Hauntings Cricut cartridge. I cut the top layer from Jac paper and used black glitter for sparkle.

Please feel free to leave a comment as I would love to hear what you think.


Wednesday, October 20, 2010

Spooky Halloween cat

I made this card for the following challenges:
Cupcake inspirations challenge #81 - cupcake inspiration challenge #81
Creative craft challenge - Trick or treat
Wee Memories challenge #27 - Celebrate good times
The cuttlebug spot challenge - Totally frightful
Poly craft challenges #66 - Purple, Green + one other colour
Crafts and me challenge #15 - Halloween


Here is the card


Here is the Sketch
(Sorry for the blurry image)



The stamped image is from Hooked on craft and I used H-0022 Halloween cats small from the halloween range.
I coloured in the image and yellow stars using copic markers and added some stickles to enhance it.
I used a cuttlebug folder for the green background and distressed it using sandpaper. The spooky sign was cut from Happy Hauntings Cricut cartridge at 3cm and the orange branch swirls which are from the same cartridge which was cut at 4cm. I used an epoxy sticker for the centre of the flower and added some bling for extra sparkle.

Please feel free to leave a comment as I would love to hear what you think.










Monday, October 18, 2010

Snowflake snowman

I made this card for the following challenges:
Sketchy colours #43 - Sketch challenge
Christmas stampin' #67 - picture inspiration
Wee memories challenge #27 - celebrate good times



Here is the card



Here is the sketch


The stamped image is from Hooked on craft and I used C-0001 Snowman from the christmas range.
I coloured in the image using copic markers and added some stickles and glitter on his hat and heart buttons. I dry embossed and distressed the red background which is layered over the candy stripe paper. I used a white mesh ribbon behind the square top layers. I used snowflake brads in the centre of the flowers and used a snowflake sticker and some bling on the top and bottom corner.

Please feel free to leave a comment as I would love to hear what you think.


Sunday, October 17, 2010

Robotz Dog card

I made this card a little while ago for my Nephew Ethan's birthday. He loves dogs and robots so I thought I would combine the two.

This is the outside of the card



The inside of the card



I used the Robotz Cricut cartridge but I can't remember what size I cut them at. I cut the white card out from Paisley cricut cartridge. Don't you just love the way the robot on the inside of the card has a message that opens up!
I had a lot of fun making this card but it did take me a while. Ethan loved it though and still has it on display!

Please feel free to leave a comment as I would love to hear what you think.


Sweet Hearts wedding cards

I made these wedding cards and I thought I should share them with you.





I cut the bride and groom at 10cm from the Sweet hearts cricut cartridge. I embossed the wedding dress using my cuttlebug. I ended up colouring the ribbon and green flower stem with copic markers as it was just too fiddly to cut them out of separate paper. I used flower soft for the bouquet which I think looks awesome. I also gave the bride a mini veil and put a flower in her hair. I also used stickles on the edge of her veil. I used a Martha Stewart punch and decorated with bling.
I hope the lucky couple appreciate the effort involved!

Please feel free to leave a comment as I would love to hear what you think



Mini monster cards

I made these two cards for my nephews for Halloween and I thought I should share them with you.

Count dracula card


 I used fit to page and it cut out at 14.5cm. I used a rub on for his belly.

Yellow monster card



I used fit to page and cut this out at 19cm. I also used a rub on for his belly.

I also made them some ATC collector cards to add to their stash.
They are made at 2 1/2 x 3 1/2 inches (ATC) size. I cut all the images at 7cm.

Here they are



Sorry about the last couple they are not as clear.
I hope they like them!

Please feel free to leave a comment as I would love to hear what you think




Halloween treat coffin box

I have made this cute coffin lolly box for the following challenges:

Stamp something challenge - Halloween somethings
Charisma cardz challenge #41 - More than one fold



Inside the box



I cut the coffin at 22cm using my cricut and the Happy Hauntings Cricut cartridge. The bat is also from the same cricut cartridge. I also cut out a layer of purple web paper for the top.
The cute beardracula is from Hooked on Craft and I used H-0008 Halloween bears small
I coloured him using copic markers of course.

Please feel free to leave a comment as I would love to hear what you think



Puppy with flower

I made this card for the craftalicious challenge #10 - anything goes.

This is the card


The stamped image is from Hooked on Craft and I used D-0009 Cute puppy large from the dogs range.
I coloured him using copic markers and layered him on paper cut out and embossed using my cuttlebug.

Please feel free to leave a comment as I would love to hear what you think.



Batty halloween cat

I have made this card for the following challenges:

Lets ink it up - use halloween colours
Creative Inspirations - Challenge #82 sketch

This is the card




This is the sketch



The stamped image is from Hooked on Craft and I used H-0026 Halloween cats small from the halloween range.
I coloured in the image using Copic markers and I cut out the frame and bats from Happy Hautings cricut cartridge. I also used black ribbon mesh behind the image. I added some bling and stickles for extra sparkle.


Please feel free to leave a comment as I would love to hear what you think.


 

Spongebob squarepants pineapple card

I made this card for my Nephew Mitchell's birthday who just loves Spongebob squarepants. If you have ever seen the cartoon you know that he lives in a pineapple house. So what better but to make a pineapple shaped card.

Here is the card


I used my Gypsy to merge the pineapple shadow together and cut it at 20cm. I then cut out the other layers and when I got to the orange layer I merged the door with the top layer using the hide contour feature to get the door by itself. I then welded it to the side of the door opening. I also used the hide contour feature to hide the cuts underneath the window where bob is.

Here is a closeup of Bob



This image was cut at 8cm. It was quite fiddly at this size especially to get the green dots cut and I had to cut a few by hand.

Here is a view of inside the door




Mitchell also collects cards so I made him some cards to add to his collection. They are made at 2 1/2 x 3 1/2 inches (ATC) size. I cut all the images at 7cm.

Spongebob squarepants




Patrick




Best day ever



I hope he likes it!

Please feel free to leave a comment as I would love to hear what you think.




Wednesday, October 13, 2010

1st Birthday card

I made this cute birthday card for a friends childs 1st birthday and to also enter into the Craftycreations challenge 89 - show a number


The gorgeous elephant stamp is from Hooked on Craft  and I used A-0021 Sweet animals from the animals range. I used copic markers to colour in the cute Elephant and used my cuttlebug to emboss the happy birthday background and cut out the shape the elephant is on. I also used a Martha Stewart border punch. I used a rubon for the 1 and covered it with a clear bubble sticker and added some ribbon.

Please feel free to leave a comment as I would love to hear what you think.



Spooky Halloween Cat

I made this card for the following challenges:
365 cards day 224 - Sketch challenge
Cupcake craft challenges 112 - Scary creatures

This is the card
This is the sketch

The awesome cat stamp is from Hooked on craft and I used H-0025 Halloween cat from the Halloween range.
I coloured in the image using Copic markers and used a Martha Stewart punch for the web border. I also used mesh ribbon behind the web border. I also added some black bling in the centre of the webs.

Please feel free to leave a comment as I would love to hear what you think.